Key Points for Limestone Installation: The Perfect Combination of Hanshi 919 and 130 🏠✨

Want your limestone decoration to be long-lasting and always beautiful? Today, we're sharing some key points for limestone installation, including how to properly use Hanshi 919 Interface Sealant and Hanshi 130 Anti-Efflorescence Additive. This guide will provide you with professional protection methods to ensure durable and eco-friendly results! 🔍✨

💎 1. How to Use Hanshi 919

To effectively seal the back and sides of limestone, preventing moisture penetration, you need to use Hanshi 919 Interface Sealant. Due to the large pores in limestone, failing to protect it properly can allow moisture to seep in through capillary action, leading to efflorescence and water stain issues. Here’s how to use Hanshi 919 correctly:

1. Apply to the Bottom and 4 Sides 🎨
   When using Hanshi 919 Interface Sealant, make sure to only apply it to the bottom and four sides of the limestone. This will effectively seal the pores and prevent moisture infiltration.

2. Avoid Applying to the Front 🚫✨
   To prevent Hanshi 919 from getting on the front surface of the limestone and affecting its appearance, use masking tape to cover the front. This ensures that the sealant does not alter the look of the stone.

3. Cure and Air Dry ⏱️
   After applying Hanshi 919, let it sit for at least 24 hours to fully cure and dry. This ensures optimal waterproofing performance.

🛠 2. How to Use Hanshi 130

Once Hanshi 919 has cured, the next step is to use Hanshi 130 Anti-Efflorescence Additive to further enhance the stone's resistance to alkalinity.

1. Proper Mixing Method 📝
   Hanshi 130 should be mixed with cement and fine sand in the right proportions to create a mortar for laying the limestone. Follow the manufacturer's recommended ratio to ensure a uniform mixture. Hanshi 130 locks in alkaline substances at the source, preventing them from migrating to the surface and forming stains.

2. Ideal Working Conditions 🌿
   Ensure a dry environment during installation and avoid working in high humidity. This will allow Hanshi 130 to work effectively and prevent efflorescence in the future.

🌊 3. Surface Waterproofing Treatment

To maintain the long-term beauty and durability of limestone, the surface also needs to be waterproofed.

1. Use Eco-Friendly Waterproofing Agents 🌱
   Choose eco-friendly waterproofing agents that protect the stone's surface, reduce moisture penetration, and have no adverse effects on the environment or health. Make sure to select breathable agents so that internal moisture can naturally evaporate, preventing mold and other issues caused by trapped humidity.

🔧 4. Conclusion

The key to long-lasting beauty and durability of limestone lies in the correct protection steps. By applying Hanshi 919 Interface Sealant to the bottom and sides, using Hanshi 130 Anti-Efflorescence Additive correctly, and protecting the surface with an eco-friendly waterproofing agent, you can significantly minimize moisture and alkaline damage to the stone.

💬 If you have more questions about limestone installation and care, feel free to leave a comment or follow us for more expert tips and home improvement insights! 🏡✨